1、 LCD splicing screens have a long fault free time and low maintenance costs.
LCD is currently the most stable and reliable display device. Due to its low heat generation, the components are stable and will not be damaged due to excessive temperature rise.
2、 LCD splicing screens have high resolution and bright images.
The dot pitch of LCD is much smaller than that of plasma, and its physical resolution can easily reach or exceed high-definition standards. LCD has high brightness and contrast, bright and vibrant colors, pure flat display without curvature, and stable and flicker free images.
IIILCD splicing screenLarge viewing angle.
For early LCD products, the viewing angle used to be a major constraint, but with the continuous advancement of LCD technology, this problem has now been completely solved. The DID LCD screen used in the LCD splicing curtain wall has a viewing angle of over 178 degrees, achieving an absolute viewing angle effect.
4、 Low power consumption and low heat generation.
LCD display devices have always been praised for their low power and low heat generation. The power of small-sized LCD screens is not more than 35W, and for LCD screens over 40 inches, their power is only about 150W, which is about one-third to a quarter of that of plasma screens.
5LCD splicing screenLong lifespan and low maintenance cost.
LCD is the display device with the longest lifespan, and its lifespan is very long. Even the shortest lifespan backlight part can last for more than 50000 hours, and even if it is used for more than such a long time, it will only affect its brightness. Simply replace the backlight tube to restore the original bright colors. This is fundamentally different from rear projection, as the lifespan of LCD backlight is ten times that of rear projection light bulbs; The biggest difference from projection is that BSV LCD splicing technology is more mature, with obvious power saving, and its advantages and disadvantages are self-evident.
6、 Innovative and progressiveness 46 "super narrow edge
The LCD splicing screen has only 6.7mm splicing, and currently the 55 inch LED backlight ultra narrow edge LCD splicing is only 5.5mm, which is the most advanced LCD splicing at present. Samsung is also developing a type of splicing similar to glass that can pass through edge seams, which will become a cross era era for DID LCD splicing.
7LCD splicing screenUltra thin and lightweight.
LCD has the characteristics of thin thickness and light weight, making it easy to assemble and install. A 40 inch dedicated LCD screen weighs only 12.5KG and has a thickness of less than 10cm, which cannot be compared to other display devices.
8、 Low failure rate.
LCD is currently the most stable and reliable display device. Due to its low heat generation, stable components, high temperature resistance, and stable heat dissipation system, it has few faults compared to other devices. 9、 The openness and scalability of the system
The digital network-based ultra narrow edge intelligent LCD splicing system follows the principle of open systems. In addition to directly accessing VGA, RGB, and video signals, the system should also be able to access network signals, broadband voice, etc. It can switch and dynamically display various signals at any time, providing users with an interactive platform and supporting secondary development; The system should have the ability to add new devices and features, making hardware expansion very simple. Meanwhile, the software only needs to be expanded and upgraded to meet the requirements, without the need to modify the source code. Both hardware and software components of the system can easily keep up with the times.
10、 Reliability of the system
The splicing unit used in the DID LCD splicing wall adopts an industrial grade Korean Samsung DID LCD dedicated screen. The splicing unit can work continuously 24 hours a day, 365 days a year, and has the characteristics of high reliability and stability to ensure the stable and reliable operation of the system.